Comtech EF Data CDD-880, Инструкция по установке и эксплуатации

Страница: 76 / 234

CDD-880 Multi Receiver Router MN-CDD880
Ethernet-based Remote Product Management Revision 2
6–6
The VFP reflects the active operating state of the CDD-880 and its physical front panel LEDs as
follows:
LED State Condition
UNIT STATUS
Green No Unit Faults or Alarms.
Amber No Unit Faults, but an Alarm exists.
Red A Unit Fault exists (Example: PSU fault).
STORED EVENT
Amber There is a Stored Event in the log, which can be viewed from the HTTP Interface
Off There are no Stored Events.
ONLINE
Green The Unit is On Line, and carrying traffic.
Off
The Unit is Off Line (standby) – forced by externally connected 1:1 or 1:N
redundancy system.
GE
LINK/ACTIVITY
Green (solid) Traffic Ethernet is connected, but no traffic exists.
Green (blinking) Ethernet activity detected.
Off
Traffic Ethernet is not connected.
Rx TRAFFIC 1
through
Rx TRAFFIC 12
Green (solid) No Rx Traffic Faults (demod and decoder are locked, everything is OK).
Green (blinking) No Rx Traffic Faults, blinks when a packet is being received from the satellite link
to this unit.
Amber Rx Traffic has an Alarm.
Red Rx Traffic has a Fault.
Off Demod is disabled.
6.2.3.2.2 Navigation
The HTTP Interface features navigation tabs, located just below the
Virtual Front Panel, at the top of each page. Once you click a
navigation tab, you may click an available primary page tab. In turn,
any nested tabs appear for further selection.
This manual uses a naming format for all Web pages to indicate the depth of navigation needed
to view the subject page: “ Top Level Tab | Primary Page Tab | Nested Tab ”.
For example: “ Status | Statistics | Traffic ” means “first click the top-level Status navigation tab;
then, click the
Statistics
primary page tab; finally, click the nested
Traffic
tab.”
6.2.3.2.3 Page Sections
Each page features one or more sections. The title at the upper-left
corner of each page or page section provides indicates its
operational features. Each section can feature editable fields,
action buttons, and read-only displays that are specific to that
section.
This manual explains the purpose and operation for each Web page on a per-page, per-section
basis.