Comtech EF Data CDD-880, Инструкция по установке и эксплуатации

Страница: 71 / 234

6–1
Chapter 6. ETHERNET-BASED
REMOTE PRODUCT
MANAGEMENT
6.1 Overview
Ethernet-based Remote Product Management of the CDD-880 Multi Receiver Router is available
using the rear panel ‘ ETHERNET | TRAFFIC | GE’ (traffic) and ‘ ETHERNET | TRAFFIC/
MANAGEMENT | GE’ (M&C) RJ-45 10/100/1000 BaseT Gigabit Ethernet ports.
1) YOU MAY PROCEED WITH ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
(SNMP OR WEB SERVER), ASSUMING THAT:
•
YOU ARE OPERATING THE CDD-880 WITH THE LATEST VERSION FIRMWARE
FILES.
•
YOU HAVE CONNECTED THE CDD-880 TO A USER-SUPPLIED, WINDOWS-
BASED PC AS FOLLOWS:
O
THE PC SERIAL PORT IS CONNECTED TO THE CDD-880 REAR PANEL
‘CONSOLE’ PORT WITH A USER-SUPPLIED SERIAL CABLE.
O
THE PC ETHERNET PORT IS CONNECTED TO THE CDD-880 REAR PANEL
‘ETHERNET | TRAFFIC/MANAGEMENT | GE’ 10/100/1000 BASE-T
GIGABIT ETHERNET M&C PORT WITH A USER-SUPPLIED HUB, SWITCH,
OR DIRECT ETHERNET CABLE CONNECTION.
O
THE USER PC IS RUNNING A TERMINAL EMULATION PROGRAM (FOR
OPERATION OF THE CDD-880 SERIAL INTERFACE) AND A COMPATIBLE
WEB BROWSER (FOR OPERATION OF THE CDD-880 HTTP (WEB SERVER)
INTERFACE).
• YOU HAVE NOTED THE CDD-880 MANAGEMENT IP ADDRESS USING THE
CDD-880 SERIAL INTERFACE.
2) COMTECH EF DATA RECOMMENDS USE OF THE SERIAL REMOTE INTERFACE AND
ETHERNET-BASED SNMP INTERFACE ONLY FOR ADVANCED USERS. ALL OTHER
USERS ARE STRONGLY ENCOURAGED TO USE THE CDD-880 HTTP INTERFACE FOR
MONITOR AND CONTROL (M&C) OF THE CDD-880.
3) THE SERIAL AND HTTP INTERFACE FIGURES FEATURED THROUGHOUT THIS
CHAPTER ARE INTENDED FOR USER REFERENCE ONLY AND ARE SUBJECT TO