Comtech EF Data CDD-880, Инструкция по установке и эксплуатации

Страница: 27 / 234

CDD-880 Multi Receiver Router MN-CDD880
Introduction Revision 2
1–5
1.3.3 Physical Features
1.3.3.1 Front Panel Features
•
Chapter 2. INSTALLATION
•
Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
Figure 1-4. CDD-880 – Front Panel View
The CDD-880 front panel ( Figure 1-4 ) provides these features:
1 LED Indicators
The front panel features 16 Light-Emitting Diode (LED) indicators. These LEDs convey
operational states as follows:
LED State Condition
UNIT STATUS
Green No Unit Faults or Alarms.
Amber No Unit Faults, but an Alarm exists.
Red A Unit Fault exists ( Example: PSU fault).
STORED
EVENT
Amber
There is a Stored Event in the log, which can be viewed from the Web Server
Interface or retrieved via the remote control interface.
Off There are no Stored Events.
ONLINE
Green The Unit is On Line, and carrying traffic.
Off
The Unit is Off Line (standby) – forced by externally connected 1:1 or 1:N
redundancy system.
GE
LINK/ACTIVITY
Green (solid) Traffic Ethernet is connected , but no traffic exists.
Green (blinking) Ethernet activity detected.
Off
GE Ethernet port is not connected.
Rx TRAFFIC 1
through 12
Green (solid) No Rx Traffic Faults (demod and decoder are locked, everything is OK).
Green (blinking) No Rx Traffic Faults, blinks when a packet is being received from the satellite
link to this unit.
Amber Rx Traffic has an Alarm.
Red Rx Traffic has a Fault.
Off Demod Card is not installed .
2 Rack Handles
In a rack enclosure, these handles help you install and remove the unit.