ComStream CM601, Инструкция по установке и эксплуатации

Страница: 78 / 228

6-6 Front Panel Operation
For example:
To navigate to 5:Modem from
Config Monitor Faults
, first press the
LCD button under Config . This displays 4:System 4:M&C More.
Select
More
. This displays
5:Modem More
.
Pressing the
Previous
button from this display takes you one level
higher (up) in the command tree to
Config Monitor Faults.
Selecting More from 5:Modem More displays slot 1’s option cards,
such as
1:RS232 1:BERT More
, if these option cards are installed, or
System M&C More if no option cards are installed in slot 1.
To navigate to System Loopback from
Config Monitor Faults,
select
Config
, then select
4:Systm
, then scroll through the options using
the down modify button until Loopback displays. To return to 4:Systm, press
Previous .
A brief description of the function of each command tree level is provided in
Table 6-5.
Table 6-5 CM601 Front Panel Command Tree Levels
Level/Components Description
Config Access to commands that determine CM601 operating characteristics or direct
the CM601 to perform specific real-time functions
4:Systm Macro, multi-card, and chassis configuration commands
4:M&C Access to monitor and control functions
Remote – commands associated with the remote control interface port
S/W Ver – access to software version number of each installed card in the
CM601
Misc – miscellaneous M&C functions such as terminal emulation and
system self-test
5:Modem Modulator, demodulator, and Doppler buffer commands
1:BERT Access to BERT configuration and monitor commands:
BConfig – configuration commands used to access, modify, and issue
BERT commands
BMonitor – commands used to review the status results of the BERT
Monitor Commands that report performance and nonfault information provided by
various monitoring points located within the CM601
Faults Commands that provide information on the status of the CM601 or indicate
when an external piece of equipment is improperly configured or is faulty
FaultLog Provides historical account of all faults that occurred since the last time the
faults were cleared; associated with yellow fault LED. A displayed fault is
preceded by the slot number of the card that is generating the fault message.
Current Provides account of all faults present at any one point in time; associated with
red fault LED. A displayed fault is preceded by the slot number of the card that
is generating the fault message.
Clear Erases the contents of the fault log