ComStream CM601, Инструкция по установке и эксплуатации

Страница: 181 / 228

Command Descriptions 01-0799-401D 08/02 21
AG AGC Level (Monitor)
Use this command to view the gain factor applied to the received signal.
AG ?
A low number indicates a strong receive signal as high as -10 dBm; a high number
indicates a weak receive signal as low as -55 dBm. A return value of 60 to 80
indicates a good signal level.
From the front panel select:
Monitor > AGC Level
AGM AGC Level in dBm (Monitor)
Use this command to view the gain in dBm applied to the received signal.
AGM ?
AO Acquisition Offset Frequency (Config) (NV)
Use this command to set the offset frequency from which the acquisition search
will begin. The acquisition offset frequency is expressed in Hz.
AO <freq>
<freq> parameter values are integers in the range of -30000 to +30000. The
default is 0.
AOS Acquisition Offset Store (Config) (NV)
Use this command to store the offset frequency (AO) value in NVRAM. Remote
modems locked to carriers with large offsets and/or small symbol rates may
require longer initial acquisition times. Storing AO may help remote modems in
signal re-acquisition following a modem reset or brief power outage.
AOS <value>
<value> parameters are:
■
0 = AO value not stored in NVRAM
■
1 = AO value is stored NVRAM (default)