COMPASS HEALTH Richmar DQAPT Скачать руководство пользователя страница 15

Страница: 15 / 70



Please dispose of the equipment and other accessories according

to local regulations.

FCC

Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the

equipment.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more

of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

-- Consult the dealer or an experienced radio/ TV technician for

help.

FCC ID: 2AXDGDQAPT

Содержание Richmar DQAPT







































































Результаты поиска

Содержание Richmar DQAPT

Отзывы:

Похожие инструкции для Richmar DQAPT

Бренды по названию

Популярные бренды

COMPASS HEALTH Richmar DQAPT, Руководство пользователя

Результаты поиска

Содержание Richmar DQAPT

Отзывы:

Похожие инструкции для Richmar DQAPT

Бренды по названию

Популярные бренды