COMPASS HEALTH Richmar DQAPT Скачать руководство пользователя страница 11

Страница: 11 / 70

Warnings and Cautions

Please read carefully the user manual before using

DQAPT

and take

care of what follows:



Read, understand, and practice the precautionary operating

instructions. Know the limitations and hazards associated with

using the

DQAPT

. Observe the precautionary and operational

decals placed on the unit.



Improper installation, operation or maintenance of

DQAPT

may

result in malfunctions of this unit or other devices.



To avoid the risk of electric shock, the

DQAPT

must only be

connected to supply mains with protective earth.



MAINS PLUG is used as the isolation means to isolate form

supply mains. Do not position the product so that it is difficult to

operate the mains plug.



Ensure that the power cord is easily detachable in an emergency

situation.



Take care not to allow water to enter the device. Liquid

penetration could damage the device. Keep cables and electric

components away from water and high humidity.



Do not connect or disconnect the device from plug with wet

hands.



Before you plug the

DQAPT

into a main socket please check that

the voltage of the device stated on the marking corresponds with

the voltage of the power supply.



Do not press, bend or damage the electric cable.



Avoid connecting more devices to the same multiple plug

(Overheating risk).

Содержание Richmar DQAPT







































































Результаты поиска

Содержание Richmar DQAPT

Отзывы:

Похожие инструкции для Richmar DQAPT

Бренды по названию

Популярные бренды

COMPASS HEALTH Richmar DQAPT, Руководство пользователя

Результаты поиска

Содержание Richmar DQAPT

Отзывы:

Похожие инструкции для Richmar DQAPT

Бренды по названию

Популярные бренды