12
and scarves that could get caught or tangled in pedal crank must
not be worn (especially during leg training). Shoes with shoe laces
must not be worn, either.
Before starting leg training, the arm trainer has to be swiveled
back so that the patient can hold on the handlebar.
Before each leg training, you must check whether the patient
’s
feet are in the correct position on the LE pedals and have been
secured with straps.
Only put patient
’s feet into the LE pedals while seated. Do not put
patient
’s feet into the LE pedals while standing. Hands are not
allowed into the LE pedals.
While the pedals are moving, you should not make any
mechanical adjustments to the device. Never try to grab hold of
any moving parts.
Please train only after you have switched on the
DQAPT
.
The device performs a self-check when it is turned on or release
emergency stop. DO NOT approach the movement area of the
ARM and LEG trainer of the device.
Please avoid the excessive vibration of the device, and operate
the touch screen should be gently.
The training parameters should be set by the doctor or under the
doctor
’s the professional guidance.
Do not exceed 20 minutes in the first training.
Do not clean the main unit with organic solvent such as gasoline
or diluents, otherwise damage will be happened to the main unit
such as deformation and falling off of the paint.
Clean the device using a dry soft cloth. Do not use cleaning
solvents or other chemical substances in order to avoid any
damages.
Do not use bleach to clean the straps. Do not put the straps under
high temperature or high pressure to sterilize.
Содержание Richmar DQAPT
Страница 1: ......
Страница 2: ......
Страница 42: ...40 Passive Mode Active Mode ...
Страница 51: ...49 Read the game tips and tell the patient how to train then press OK button to start training ...