Compaq AlphaServer ES40, Руководство пользователя

Страница: 72 / 228

3-6 ES40 Owner’s Guide
Linux Systems
The flags_value argument for Linux on an ES40 system is:
“root=/dev/sda2”
Flags_value Arguments for Red Hat Distribution
0 Halt. (Do not set init default to this.)
1 Single-user mode.
2 Multiuser, without NFS (same as 3, if you do not have networking)
3 Full multiuser mode (Default)
4 Unused
5 X11
6 Reboot. (Do not set init default to this.)
Flags_value Arguments for SuSE
0 Halt. (Do not set init default to this.)
S Single-user mode. (Default)
1 Multi-user without network
2 Multiuser with network
3 Multiuser with network and xdm
6 Reboot. (Do not set init default to this.)
Examples
Single-user mode is typically used for troubleshooting. To make system changes
at this run level, you must have read/write privileges.
The following setting will boot Linux into single-user mode with read/write
privileges under Red Hat distribution.
P00>>> set boot os_flags “root=/dev/sda2 1 rw”
The following setting will boot Linux into multiuser mode with network under
SuSE distribution:
P00>>> set boot os_flags “root=/dev/sda2 2”