Compaq AlphaServer ES40, Руководство пользователя

Страница: 226 / 228

Index-4
Regulatory approvals, 8-8
Remote power-on/off, 4-20
Removable media, 1-16
Removable media device, installing, 5-
38
Removing enclosure panels, 5-2
from a pedestal, 5-5
from a tower, 5-3
Reset button, 1-9
Reset command (RMC), 1-9
Reset, from RMC, 1-9, 4-21
RIS boot, 3-12
RIS boot procedure, 3-13
RMC
auxiliary power supply, 4-3
bypass modes, 4-6
CLI, 4-13
command conventions, 4-14
commands, 4-13
configuring call-out, 4-22
data flow diagram, 4-4
dial-out alert, 4-24
entering, 4-10
env command, 4-18
error messages, 7-8
escape sequence, 4-10
exiting, 4-10
exiting from local VGA, 4-11
firm bypass mode, 4-8
hangup command, 4-23
local mode, 4-5
logic, 4-3
operating modes, 4-4
overview, 4-2
PIC processor, 4-3
quit command, 4-10
remote power on/off, 4-20
remote reset, 4-21
resetting to factory defaults, 4-28
set com1_mode command, 4-15
set escape command, 4-27
snoop mode, 4-7
soft bypass mode, 4-7
status command, 4-16
terminal setup, 4-9
through mode, 4-5
troubleshooting, 4-30
RMC firmware, updating, 6-5
S
SCSI bus length, 5-45
SCSI expansion, 5-45
Security, for SRM console, 2-24
Serial mode, setting up, 2-30
Serial terminal
running utilities from, 2-31
set com1_mode command (RMC), 4-15
set escape command (RMC), 4-27
set ocp_text command (SRM), 2-13
Setting SRM environment variables, 2-
23
Shared RAM, 4-3
show boot* command (SRM), 2-15
show command (SRM), 2-14
show config command (SRM), 2-16
show device command (SRM), 2-21
show error command (SRM), 7-19
show fru command (SRM), 7-16
show memory command (SRM), 2-22
show power command (SRM), 7-20
Slot numbers
CPUs, 5-16
PCI, 5-31, 5-32
Snoop mode, 4-7
Soft bypass mode, 4-7
Specifications, 8-2
SRM console, 2-11
device naming, 2-21
power-up display, 2-6
security, 2-24
SRM console commands
crash, 7-22
show boot*, 2-15
show config, 2-16
show device, 2-21
show error, 7-19
show fru, 7-16
show memory, 2-22
show power, 7-20
test, 7-14
SRM console prompt, 2-10
SRM diagnostics, 7-12