manualshive.com logo in svg

Compaq 2500 - ProLiant - 64 MB RAM, Справочное руководство

Скачайте руководство по установке для продукта Compaq 2500 - ProLiant - 64 MB RAM бесплатно с нашего веб-сайта. Ознакомьтесь с деталями об установке и настройке этого надежного сервера. Получите необходимую помощь для использования вашего устройства. Откройте мир возможностей с manualshive.com.

Поделиться
Скачать
background image

H-2   

POST Error Messages

Writer: Pamela King   Project: SMART-2DH Array Controller Reference Guide    Comments: 295469-002

File Name: O-APPH.DOC   Last Saved On: 2/27/98 12:10 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

continued

 

POST Error Messages

  

 continued

  

1726

Slot x Drive Array - Array Accelerator Memory
Size Change Detected.

This message indicates that the array
accelerator configuration has been updated
automatically due to replacement of the Array
Accelerator (or controller) with one having
different memory size. Select 

F1

 key to

resume.

1727

Slot x Drive Array - New Logical Drive(s)
Attachment Detected. If more than 32 logical
drives, this message will be followed by:
Auto-configuration failed: Too many logical
drives.

This message indicates that the controller has
detected an additional array of drives that was
attached when the power was off. The logical
drive configuration information has been
updated to add the new logical drives. The
maximum number of logical drives supported
is 32-additional logical drives will not be added
to the configuration. Select 

F1

 key to resume.

1764

Slot x Drive Array - Capacity Expansion
Process is Temporarily Disabled (followed by
one of the following:)

1. Expansion will resume when Array

Accelerator has been reattached.

2. Expansion will resume when Array

Accelerator has been replaced.

3. Expansion will resume when Array

Accelerator RAM allocation is successful.

4. Expansion will resume when Array

Accelerator battery reaches full charge.

5. Expansion will resume when Automatic

Data Recovery has been Completed.

(RESUME = 

F1

 KEY)

The capacity expansion process has been
temporarily disabled for the reason indicated,
and will automatically resume. If the array
accelerator has been removed, you must
reinstall it for capacity expansion to continue.

1765

Slot x Drive Array Option ROM Appears to
Conflict with an ISA Card - ISA cards with
16-bit memory cannot be configured in

Remove or reconfigure the conflicting ISA card,
referring to the directions provided with the ISA
card. Alternatively, the Option ROM can be

Содержание 2500 - ProLiant - 64 MB RAM







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2500 - ProLiant - 64 MB RAM

Stanwax Laser ILDA Gem Laser projector tool Instructions preview
ILDA Gem Laser projector tool
Бренд: Stanwax Laser Страницы: 3
IEI Technology HPE-4S1 Quick Installation Manual preview
HPE-4S1
Бренд: IEI Technology Страницы: 3
Lucent Technologies PARTNER Voice Messaging PC Card Release 2 Installation And Programming preview
PARTNER Voice Messaging PC Card Release 2
Бренд: Lucent Technologies Страницы: 67
Roland MSL-15 Owner'S Manual preview
MSL-15
Бренд: Roland Страницы: 12
Garland EdgeLens INT10G8LR56 User Manual preview
EdgeLens INT10G8LR56
Бренд: Garland Страницы: 30
Idis DR-1508P Operation Manual preview
DR-1508P
Бренд: Idis Страницы: 85
ZALMAN Extreme Gaming VGA Cooler GV1000 User Manual preview
Extreme Gaming VGA Cooler GV1000
Бренд: ZALMAN Страницы: 7
Lanner NCA-1040 User Manual preview
NCA-1040
Бренд: Lanner Страницы: 59
CNC4PC C52- ESS User Manual preview
C52- ESS
Бренд: CNC4PC Страницы: 11
SilverStone GD05 Manual preview
GD05
Бренд: SilverStone Страницы: 28
Buffalo LinkStation 500 User Manual preview
LinkStation 500
Бренд: Buffalo Страницы: 139
Hologic ThinPrep 3000 Operator'S Manual preview
ThinPrep 3000
Бренд: Hologic Страницы: 256
Vivotek ND8212W Hardware Installation Manual preview
ND8212W
Бренд: Vivotek Страницы: 46
Aerotech QNP3 Series Hardware Manual preview
QNP3 Series
Бренд: Aerotech Страницы: 62
Adaptec ASR-3085 Important Information About Issues And Errata preview
ASR-3085
Бренд: Adaptec Страницы: 3
VIA Technologies ARTiGO-A1200 Quick Manual preview
ARTiGO-A1200
Бренд: VIA Technologies Страницы: 2
Gigamon GigaVUE H Series Hardware Installation Manual preview
GigaVUE H Series
Бренд: Gigamon Страницы: 55
Velleman K8048 Manual preview
K8048
Бренд: Velleman Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды