Comnet CNGE2FE16MS, Инструкция по установке и эксплуатации

Страница: 123 / 128

inS_cnge2fe16MS_reV–
01/11/12 Page 123
INSTALLATION AND OPERATION MANUAL CNGE2FE16MS
TECh SUPPORT: 1.888.678.9427
SystemLog, SMTP and Event Commands Set
Commands Level Description Example
systemlog mode
[client|server|both]
G Specify the log mode switch(config)# systemlog mode
both
systemlog ip
[IP address]
G Set System log server IP address. switch(config)#
systemlog ip
192.168.1.100
show systemlog E Display system log. Switch>
show systemlog
show systemlog P Show system log client & server
information switch# show systemlog
no systemlog G Disable systemlog functon switch(config)# no systemlog
smtp enable G Enable SMTP function switch(config)# smtp enable
smtp serverip
[IP address]
G Configure SMTP server IP switch(config)# smtp serverip
192.168.1.5
smtp sender G Send the sender identification
when an event occurs switch(config)# smtp sender test01
smtp authentication G Enable SMTP authentication switch(config)#
smtp authentication
smtp account
[account]
G Configure authentication accountswitch(config)#
smtp account John
smtp password
password:
[password]
confirm password:
[password]
G Configure authentication
password switch(config)# smtp password
password: 1234
confirm password: 1234
smtp rcptemail
[Index] [Email address]
G Configure Rcpt e-mail Address switch(config)# smtp rcptemail 1
Alert@test.com
show smtp P Show the information of SMTP switch#
show smtp
no smtp G Disable SMTP function switch(config)#
no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event type switch(config)#
event device-cold-
start both
event authentication-failure
[Systemlog|SMTP|Both]
G Set the event type of
Authentication failure switch(config)# event
authentication-failure both
event mac-violation
[Systemlog|SMTP|Both]
G Set the event type of MAC
Violation switch(config)# event mac-violation
both
event systemlog
[Link-UP|Link-Down|Both]
I Set port event for system log switch(config)# interface
fastethernet 3
switch(config-if)#
event systemlog
both
event smtp
[Link-UP|Link-Down|Both]
I Set port event for SMTP switch(config)# interface
fastethernet 3
switch(config-if)# event smtp both
show event P Show event selection switch# show event
no event device-cold-start
[Systemlog|SMTP|Both]
G Disable cold start event type switch(config)# no event device-
cold-start both