inS_cnge2fe16MS_reV–
01/11/12 Page 100
INSTALLATION AND OPERATION MANUAL
CNGE2FE16MS
TECh SUPPORT: 1.888.678.9427
MAC Address Table
Here users can determine whether the incoming traffic passes through the particular ports or is
blocked in accordance with the MAC-address filtering table.
Static MAC Address
Configure the static MAC address tab to make a list in which traffic from devices with the MAC
address included will pass the port. You can add a static MAC address that remains in the switch’s
address table regardless of whether the device is physically connected to the switch. This saves
the switch from having to re-learn a device’s MAC address when the disconnected or powered-off
device is active on the network again. Via this interface, you can add, modify and delete entries of
static MAC address.
Add the Static MAC Address
You can enter up to 256 static MAC addresses in the switch MAC Address Table here.
»
MAC Address
: Enter entries of MAC address on the port that should permanently forward
traffic, regardless of the device network activity.
»
Port No.
: Use the pull-down menu to select the port number.
»
Select the
Add
button to finish adding the entry.
»
If you want to delete the entry from the table, select the MAC address entry listed in the list
and select the
Delete
button.
Figure 91 – Static MAC Addresses interface
