manualshive.com logo in svg

Comnet CNGE20MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CNGE20MS Скачать руководство пользователя страница 92

INS_CNGE24MS-OB(M,S)_REV–

09/12/12     PAGE 92

INSTALLATION AND OPERATION MANUAL 

CNGE24MS-OB(M,S)

TECH SUPPORT: 1.888.678.9427

Label

Description

TCP/UDP Source 
Filter

Specify the TCP/UDP source filter for this ACE.  
Any: No TCP/UDP source filter is specified (TCP/UDP source filter status is “don’t-care”).  
Specific: If you want to filter a specific TCP/UDP source filter with this ACE, you can enter 
a specific TCP/UDP source value. A field for entering a TCP/UDP source value appears.  
Range: If you want to filter a specific TCP/UDP source range filter with this ACE, you can 
enter a specific TCP/UDP source range value. A field for entering a TCP/UDP source 
value appears.

TCP/UDP Source 
No.

When “Specific” is selected for the TCP/UDP source filter, you can enter a specific TCP/
UDP source value. The allowed range is 0 to 65535. A frame that hits this ACE matches 
this TCP/UDP source value.

TCP/UDP Source 
Range

When “Range” is selected for the TCP/UDP source filter, you can enter a specific TCP/
UDP source range value. The allowed range is 0 to 65535. A frame that hits this ACE 
matches this TCP/UDP source value.

TCP/UDP 
Destination Filter

Specify the TCP/UDP destination filter for this ACE.  
Any: No TCP/UDP destination filter is specified (TCP/UDP destination filter status is 
“don’t-care”).  
Specific: If you want to filter a specific TCP/UDP destination filter with this ACE, you can 
enter a specific TCP/UDP destination value. A field for entering a TCP/UDP destination 
value appears.  
Range: If you want to filter a specific range TCP/UDP destination filter with this ACE, you 
can enter a specific TCP/UDP destination range value. A field for entering a TCP/UDP 
destination value appears.

TCP/UDP 
Destination 
Number

When “Specific” is selected for the TCP/UDP destination filter, you can enter a specific 
TCP/UDP destination value. The allowed range is 0 to 65535. A frame that hits this ACE 
matches this TCP/UDP destination value.

TCP/UDP 
Destination 
Range

When “Range” is selected for the TCP/UDP destination filter, you can enter a specific 
TCP/UDP destination range value. The allowed range is 0 to 65535. A frame that hits this 
ACE matches this TCP/UDP destination value.

TCP FIN

Specify the TCP “No more data from sender” (FIN) value for this ACE.  
0: TCP frames where the FIN field is set must not be able to match this entry.  
1: TCP frames where the FIN field is set must be able to match this entry.  
Any: Any value is allowed (“don’t-care”).

Содержание CNGE20MS

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды