manualshive.com logo in svg

Comnet CNGE20MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CNGE20MS Скачать руководство пользователя страница 67

INS_CNGE24MS-OB(M,S)_REV–

09/12/12     PAGE 67

INSTALLATION AND OPERATION MANUAL 

CNGE24MS-OB(M,S)

TECH SUPPORT: 1.888.678.9427

Label

Description

DP level

Controls the default Drop Precedence Level. 
All frames are classified to a DP level. 
If the port is VLAN aware and the frame is tagged, then the frame is classified to a DP 
level that is equal to the DEI value in the tag. Otherwise the frame is classified to the 
default DP level. 
If the port is VLAN aware, the frame is tagged and Tag Class is enabled, then the 
frame is classified to a DP level that is mapped from the PCP and DEI value in the tag. 
Otherwise the frame is classified to the default DP level. 
The classified DP level can be overruled by a QCL entry.

PCP

Controls the default PCP value. 
All frames are classified to a PCP value. 
If the port is VLAN aware and the frame is tagged, then the frame is classified to the PCP 
value in the tag. Otherwise the frame is classified to the default PCP value.

DEI

Controls the default DEI value. 
All frames are classified to a DEI value. 
If the port is VLAN aware and the frame is tagged, then the frame is classified to the DEI 
value in the tag. Otherwise the frame is classified to the default DEI value.

Tag Class

Shows the classification mode for tagged frames on this port. 
Disabled: Use default QoS class and DP level for tagged frames. 
Enabled: Use mapped versions of PCP and DEI for tagged frames. 
Click on the mode in order to configure the mode and/or mapping. 
Note: This setting has no effect if the port is VLAN unaware. Tagged frames received on 
VLAN unaware ports are always classified to the default QoS class and DP level.

DSCP Based

Click to Enable DSCP Based QoS Ingress Port Classification.

Содержание CNGE20MS

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды