manualshive.com logo in svg

Comnet CNGE20MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CNGE20MS Скачать руководство пользователя страница 113

INS_CNGE24MS-OB(M,S)_REV–

09/12/12     PAGE 113

INSTALLATION AND OPERATION MANUAL 

CNGE24MS-OB(M,S)

TECH SUPPORT: 1.888.678.9427

Detailed Statistics-Receive & Transmit Total

Label

Description

Rx and Tx Packets The number of received and transmitted (good and bad) packets.
Rx and Tx Octets The number of received and transmitted (good and bad) bytes. Includes FCS, but 

excludes framing bits.

Rx and Tx Unicast The number of received and transmitted (good and bad) unicast packets.
Rx and Tx 
Multicast

The number of received and transmitted (good and bad) multicast packets.

Rx and Tx 
Broadcast

The number of received and transmitted (good and bad) broadcast packets.

Rx and Tx Pause A count of the MAC Control frames received or transmitted on this port that have an 

opcode indicating a PAUSE operation.

Rx Drops

The number of frames dropped due to lack of receive buffers or egress congestion.

Rx CRC/
Alignment

The number of frames received with CRC or alignment errors.

Rx Undersize

The number of short 1 frames received with valid CRC.

Rx Oversize

The number of long 2 frames received with valid CRC.

Rx Fragments

The number of short 1 frames received with invalid CRC.

Rx Jabber

The number of long 2 frames received with invalid CRC.

Rx Filtered

The number of received frames filtered by the forwarding process.

Содержание CNGE20MS

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды