manualshive.com logo in svg

Comnet CNGE20MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CNGE20MS Скачать руководство пользователя страница 31

INS_CNGE24MS-OB(M,S)_REV–

09/12/12     PAGE 31

INSTALLATION AND OPERATION MANUAL 

CNGE24MS-OB(M,S)

TECH SUPPORT: 1.888.678.9427

Port Trunk

Trunk Configuration

This page is used to configure the Aggregation hash mode and the aggregation group.

Label

Description

Source MAC 
Address

The Source MAC address can be used to calculate the destination port for the frame. 
Check to enable the use of the Source MAC address, or uncheck to disable. By default, 
Source MAC Address is enabled.

Destination MAC 
Address

The Destination MAC Address can be used to calculate the destination port for the 
frame. Check to enable the use of the Destination MAC Address, or uncheck to disable. 
By default, Destination MAC Address is disabled.

IP Address

The IP address can be used to calculate the destination port for the frame. Check 
to enable the use of the IP Address, or uncheck to disable. By default, IP Address is 
enabled.

TCP/UDP Port 
Number

The TCP/UDP port number can be used to calculate the destination port for the frame. 
Check to enable the use of the TCP/UDP Port Number, or uncheck to disable. By 
default, TCP/UDP Port Number is enabled.

Label

Description

Group ID

Indicates the group ID for the settings contained in the same row. Group ID “Normal” 
indicates there is no aggregation. Only one group ID is valid per port.

Port Members

Each switch port is listed for each group ID. Select a radio button to include a port in 
an aggregation, or clear the radio button to remove the port from the aggregation. By 
default, no ports belong to any aggregation group. Only full duplex ports can join an 
aggregation and ports must be in the same speed in each group.

Содержание CNGE20MS

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды