INS_CNGE24MS-OB(M,S)_REV–
09/12/12 PAGE 42
INSTALLATION AND OPERATION MANUAL
CNGE24MS-OB(M,S)
TECH SUPPORT: 1.888.678.9427
Label
Description
Priority
Controls the port priority. This can be used to control priority of ports having identical
port cost. (See above).
OpenEdge (state
flag)
Operational flag describing whether the port is connecting directly to edge devices. (No
Bridges attached). Transitioning to the forwarding state is faster for edge ports (having
operEdge true) than for other ports.
AdminEdge
Controls whether the openEdge flag should start as being set or cleared. (The initial
openEdge state when a port is initialized).
AutoEdge
Controls whether the bridge should enable automatic edge detection on the bridge
port. This allows openEdge to be derived from whether BPDU’s are received on the port
or not.
Restricted Role
If enabled, causes the port not to be selected as Root Port for the CIST or any MSTI,
even if it has the best spanning tree priority vector. Such a port will be selected as an
Alternate Port after the Root Port has been selected. If set, it can cause lack of spanning
tree connectivity. It can be set by a network administrator to prevent bridges external
to a core region of the network influencing the spanning tree active topology, possibly
because those bridges are not under the full control of the administrator. This feature is
also known as Root Guard.
Restricted TCN
If enabled, causes the port not to propagate received topology change notifications
and topology changes to other ports. If set it can cause temporary loss of connectivity
after changes in a spanning trees active topology as a result of persistent incorrectly
learned station location information. It is set by a network administrator to prevent
bridges external to a core region of the network, causing address flushing in that region,
possibly because those bridges are not under the full control of the administrator or is
the physical link state for the attached LANs transitions frequently.
Point-to-Point
Controls whether the port connects to a point-to-point LAN rather than a shared
medium. This can be automatically determined, or forced either true or false. Transition
to the forwarding state is faster for point-to-point LANs than for shared media.
Save
Select to save changes.
Reset
Select to undo any changes made locally and revert to previously saved values.
