manualshive.com logo in svg

Comnet CNGE20MS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CNGE20MS Скачать руководство пользователя страница 76

INS_CNGE24MS-OB(M,S)_REV–

09/12/12     PAGE 76

INSTALLATION AND OPERATION MANUAL 

CNGE24MS-OB(M,S)

TECH SUPPORT: 1.888.678.9427

Label

Description

1. Any

Allow all types of frames.

2. Ethernet

Ethernet Type Valid Ethernet type can have a value within 0x600-0xFFFF or ‘Any’ but 
excluding 0x800(IPv4) and 0x86DD(IPv6), default value is ‘Any’.

3. LLC

SSAP Address Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 
‘Any’, the default value is ‘Any’. 
DSAP Address Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF 
or ‘Any’, the default value is ‘Any’. 
Control Valid Control field can vary from 0x00 to 0xFF or ‘Any’, the default value is ‘Any’.

4. SNAP

PID Valid PID(a.k.a Ethernet type) can have value within 0x00-0xFFFF or ‘Any’, default 
value is ‘Any’.

5. IPv4

Protocol IP protocol number: (0-255, TCP or UDP) or ‘Any’. 
Source IP Specific Source IP address in value/mask format or ‘Any’. IP and Mask are in 
the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and 255. When 
Mask is converted to a 32-bit binary string and read from left to right, all bits following 
the first zero must also be zero. 
DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of values or 
‘Any’. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43. 
IP Fragment Ipv4 frame fragmented option: yes|no|any. 
Sport Source TCP/UDP port(0-65535) or ‘Any’, specific or port range applicable for IP 
protocol UDP/TCP. 
Dport Destination TCP/UDP port(0-65535) or ‘Any’, specific or port range applicable for 
IP protocol UDP/TCP

6.IPv6

Protocol IP protocol number: (0-255, TCP or UDP) or ‘Any’. 
Source IP IPv6 source address: (a.b.c.d) or ‘Any’, 32 LS bits. 
DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of values or 
‘Any’. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43. 
Sport Source TCP/UDP port:(0-65535) or ‘Any’, specific or port range applicable for IP 
protocol UDP/TCP. 
Dport Destination TCP/UDP port:(0-65535) or ‘Any’, specific or port range applicable for 
IP protocol UDP/TCP.

Action 
Parameters

Class QoS class: (0-7) or ‘Default’. 
DP Valid Drop Precedence Level can be (0-1) or ‘Default’. 
DSCP Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or ‘Default’. 
‘Default’ means that the default classified value is not modified by this QCE.

Содержание CNGE20MS

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды