CommScope OneCell RP5100i, Установка и пусконаладка оборудования

Страница: 95 / 108

Chapter 5 Configuring the OneCell system
OneCell
®
Installation and Commissioning, RP5000 series, Release 4.0 5-25
D
R
A
F
T
• Click Choose File and enter the name of the *.tar or *.tar.gz or *.zip file that
contains operator access information.
• Click Upload .
Observe the colors of the menu items on the left side of the screen.
Color Description
Gray Configuration is either not applicable to this deployment, or has not yet been
configured.
Green Configuration has been successfully validated.
Red Errors have been encountered that must be corrected.
If the XML file fails validation, click the hyperlink to locate the errors.
Configuring the Baseband Controller manually
If you choose to enter the configuration manually, use one of the following methods to
advance to the next step.
• Select the right arrow in the bottom right corner of the screen
• Select the menu titled ‘Deployment Questionnaire’
• Select GPS Information if the BC is in GPS timing mode