CommScope OneCell RP5100i, Установка и пусконаладка оборудования

Страница: 90 / 108

Chapter 5 Configuring the OneCell system
5-20 913035 4.0.04 June 2019
D
R
A
F
T
Secondary DNS Address IP Address of the Secondary DNS Server
<A.B.C.D>
VLAN Access Mode range = 0
Trunk Mode range = 11 to 4095
MTU Range = 64 to 1998
Network Interface Port Configurations – FrontHaul Configuration
Baseband Controller ID (BC ID) The ID of the Baseband Controller
Range = 1 to 254
VLAN ID (For IQ) The VLAN ID used for the IQ traffic
Access Mode range = 0
Trunk Mode range = 11 to 4095
Timing Cluster ID (TC ID) The Timing Cluster ID is used for generating the Multicast IP
Address for 1588 packets and the Cluster Multicast IP Address
used in pacemaker.
Range = 1 to 254
Network Interface Port Configurations – Redundancy
IP Address Assignment • Static mode – IP Addresses are configured manually
• DHCP (Client) mode – The DHCP client fetches IP addresses
from the DHCP server and assigns them to the interface. User
configuration is not required.
IP Address IP Address of the interface
<A.B.C.D>
Subnet Mask
or
CIDR (Classless Inter-Domain
Routing)
Network subnet mask of the client
CIDR format [1-32]
Default Gateway The IP Address of the router on this subnet
<A.B.C.D>
Primary DNS Address IP Address of the Primary DNS Server
<A.B.C.D>
Secondary DNS Address IP Address of the Secondary DNS Server
<A.B.C.D>
Table 5-2. Baseband Controller operator parameters, configuration file
Parameter Description