CommScope OneCell RP5100i, Установка и пусконаладка оборудования

Страница: 94 / 108

Chapter 5 Configuring the OneCell system
5-24 913035 4.0.04 June 2019
D
R
A
F
T
2 Go to the Installation Wizard – System Configuration menu item.
3 Upload the configuration file.
SNMP Port The listening port of the SNMP management server
User-based Security Model
(USM) Values:
• Yes
• No
If value is Yes, you will be able to configure the authentication and
privacy fields.
If value is No, SNMP will not be authenticated.
UserName The default is the Baseband Controller’s MAC ID
Auth Protocol The authentication protocol
Supported values:
• HMAC-SHA-96 (default)
• HMAC-MD5-96
Auth Key User defined string
Private Protocol Optional protocol
Supported values:
• CBC-DES
• None (default)
Private Key User defined string
SNMP Enabled Alarms List of SNMP Trap Names that can be enabled or disabled for trap
generation from the OneCell device
Whitelist Configuration
Whitelist Provides Radio Point MAC Addresses for Whitelist in-line in the
config.xml
When in-line Whitelist is provided, the Whitelist file will not be
considered for upload
Whitelist File Name of the file when Whitelist configuration is provided in an
external file.
Note:
The Whitelist file has to be added as part of the
archive file for uploading the configuration
License Configuration
License File Name of the license binary file
Note:
The license file needs to be added as part of the
archive file for uploading the configuration.
Table 5-2. Baseband Controller operator parameters, configuration file
Parameter Description