CommScope OneCell RP5100i, Установка и пусконаладка оборудования

Страница: 89 / 108

Chapter 5 Configuring the OneCell system
OneCell
®
Installation and Commissioning, RP5000 series, Release 4.0 5-19
D
R
A
F
T
IP Address Assignment • Static mode - IP Addresses are configured manually
• DHCP (Client) mode - The DHCP client fetches IP addresses
from the DHCP server and assign to the interface; user
configuration is not required
IP Address IP Address of the interface
<A.B.C.D>
Subnet Mask
or
CIDR (Classless Inter-Domain
Routing)
Network subnet mask of the client
CIDR format [1-32]
Default Gateway The IP Address of the router on this subnet
<A.B.C.D>
Primary DNS Address IP Address of the Primary DNS Server
<A.B.C.D>
Secondary DNS Address IP Address of the Secondary DNS Server.
<A.B.C.D>
Note:
This field is optional if the Primary DNS Address is
configured.
VLAN ID Access Mode range = 0
Trunk Mode range = 11 to 4095
MTU Range = 64 to 1998
Network Interface Port Configurations – Boundary Clock Configuration
IP Address Assignment • Static mode – IP Addresses are configured manually.
• DHCP (Client) mode – The DHCP client will fetch IP
addresses from the DHCP server and assign to the interface;
User configuration is not required.
IP Address IP Address of the interface
<A.B.C.D>
Subnet Mask
or
CIDR (Classless Inter-Domain
Routing)
Network subnet mask of the client
CIDR format [1-32]
Default Gateway The IP Address of the router on this subnet
<A.B.C.D>
Primary DNS Address IP Address of the Primary DNS Server
<A.B.C.D>
Table 5-2. Baseband Controller operator parameters, configuration file
Parameter Description