Visit www.commscope.com for complete specifications on all the products listed
Bulletin # 7693902 Rev. L
Technical Publication
15
Slide the protective sleeve and power weatherproofing boot
over power cable.
Cut bird resistant sleeve at . Be careful not to cut the
power conductor inside of the bird proofing. Dispose of
excess bird resistant sleeve.
X
X
Cut the power conductor to 170 mm (6.69 in).
Dispose of excess power conductor.
170 mm
(6.69 in)
3
4
5
Replace bird resistant connector
by sliding connector over cable while
twisting clockwise. Tighten the
gland nut on the power cable.
1
1
2
2
6
Slide the protective sleeve over the power
weatherproofing boot. Connect aluminum
bracket to the RRU with screw provided.
7
Connect the power conductors to the RRU and slide the
power weatherproofing boot into place.
8
+ -
+ GND -
