CommScope HELIAX FiderFeed DFJ-4S112B Скачать руководство пользователя страница 1

Страница: 1 / 23

Visit www.commscope.com for complete specifications on all the products listed

Bulletin # 7693902 Rev. L

Technical Publication

Related Support and Learning Opportunities Offered by the CommScope Infrastructure Academy

The insights and expertise contained in this manual represent just one small part of CommScope's

global learning initiative. Few industries are evolving as quickly as wireless communications. Every

technological innovation impacts what happens in the field. Our customers look to the CommScope

Infrastructure Academy to make sure their technicians and installers are well trained, well-prepared,

and well-educated to take advantage of opportunities as they evolve. To access a course, go to

www.commscopetraining.com/coursecatalog.php, course #6107

Field Engineering Services (FES)

Support services, such as our Field Engineering Services (FES) Group gives CommScope customers

access to technical support where and when it is needed the most — in the field. The FES team is

staffed by an expert team of technicians who, in turn, are supported by some of the brightest and

most experienced product line managers.

Section 1: Direct Breakout Components / Accessories ………...…………….......…………………………….…02

Section 2: Color Coding ...................................................................………………………………………..………03

Section 3: Hoisting Considerations .................................................………………………………………..………04

Section 4: DCM-U Mounting / Grounding .......….............................................................…………………....…07

Section 5: All-in-One Cleaner / Inspecting .....….............................................................…………………....…08

Section 6: General Specifications Fibre Tails ........……..............……………………….……....……………….....09

Section 7: DFJ-4S112B Fibre Tail Installation .......……..............……………………….……....……………….....10

Section 8: DFJ-4S114B Fibre Tail Installation .....……..............……………………….……....……………….....13

Section 9: DFJ-4S113B Fibre Tail Installation .....……..............……………………….……....……………….....16

Section 10: Protecting Unused Fibre .............................................................…………….…….……………..……18

Section 11: Excess Cable Management ......................................................…………….…….……………..……18

Section 12: MPO Installation / Wiring ..................................................………………………………………….....20

Section 13: Jacketing Removal Procedure for Additional Grounding / Reel Packaging .......................……22

Section 14: Installation Check List ................................................................................………………..……..……23

For more information, Contact Customer Service Center

Australia Tel 03 9300 7969 or Toll Free on 1800 803 219
United States and Mexico 1-800-255-1479 or 1-888-235-5732
International: +1-779-435-8579

For the most current, up-to-date information on all our products and product
information please visit our eCatalog section at www.commscope.com.

Installation Guidelines – HELIAX

FiberFeed

Direct

Solution: Direct Connect Bird Resistant Solution

Содержание HELIAX FiderFeed DFJ-4S112B
























Результаты поиска

Содержание HELIAX FiderFeed DFJ-4S112B

Отзывы:

Похожие инструкции для HELIAX FiderFeed DFJ-4S112B

Бренды по названию

Популярные бренды

CommScope HELIAX FiderFeed DFJ-4S112B, Техническая публикация

Результаты поиска

Содержание HELIAX FiderFeed DFJ-4S112B

Отзывы:

Похожие инструкции для HELIAX FiderFeed DFJ-4S112B

Бренды по названию

Популярные бренды