CommPower CP-145 Скачать руководство пользователя страница 113

Страница: 113 / 121

ACP-145 Installation and Administration Manual

E-2

/cpe/cp-145/adm/004 (07/14)



Recover

– Message will be recovered at CP-145 start-up



No Recovery

– Message is inactive and no further

processing will performed on this message during or after

CP-145 startup.

Time

: Indicates the time that the message was received by the CP-

145.

Message UID

: The unique message ID assigned to the message by

CP-145.

Format

: The input format of the message.

Header

: Header information from the message.

Highlighting one or more messages will make the

Don’t Recover

and

Recover

buttons selectable. These buttons can be used to change the

Status

of the message(s) to the desired setting. A right mouse click over a

highlighted message(s) provides a drop down list with the same two

Status

button setting options as above.

All

Status

changes made by a button selection or mouse click are

immediately displayed in the

Active Messages

area for the selected

message(s).

The changes are not permanently saved to the MAD until

Apply Changes

and Exit

is selected from the File Menu. This File Menu option is not

selectable until a

Status

change is made to one or more messages.

Содержание CP-145


























































































































Результаты поиска

Содержание CP-145

Отзывы:

Бренды по названию

Популярные бренды

CommPower CP-145, Руководство по установке и администрированию

Результаты поиска

Содержание CP-145

Отзывы:

Бренды по названию

Популярные бренды