Commend SIP Series
Appendix
2.0/0612
67
Status
Here the station data is indicated, like e.g. IP address, registration status, version.
Select
Status
from the main menu with
.
Leave the menu with
.
Call Initiation at SIP-WS 500F
As the SIP-WS 500F do not contain any display, the operation is facilitated with the output of audio si-
gnals.
The way a call is initiated depends on whether the checkbox
Allow Arbitrary Dailing
(
see page 41
)
is activated or deactivated:
Allow Arbitrary Dailing NOT activated
Buttons
Note:
The volume can also be controlled during an active conversation.
With
the respective volume is saved also for the next conversation (as described
above
).
General Note:
According to the selected option at
Answer Call
(tab
SIP
see ”Call Settings” on page 40
) different dis-
play screens at incoming calls are possible.
After a button is pressed, it is checked whether the dialled call number is stored in the
”Phonebook”
.
If a match is found, then the call number will be dialled immediately.
If the call number could not be found in the
”Phonebook”
,
then the complete number is deleted after a
timeout
of
10 seconds
and
a
double tone
is put out and the “input mode” is restarted, i.e. a
new number
can be
dialled.
If the complete “line” or last digit is deleted, then
a
double tone
is put out and input mode is restarted, i.e. a
new number
can be dialled
The conversation can be cancelled according to the respective configuration
see page 40
.
Menu button
: no function
Volume controllable by
arrow buttons
Enter button
: only saving volume
press short:
delete last digit
press for at least 1 second:
delete complete line (call number)
no function
