Configuration via Web Interface
Commend SIP Series
48
2.0/0612
Indication of the file length:
If the desired audio files are loaded into the memory of the SIP station, the length of the respective
audio file is displayed in the appropriate line (
) and the total length of all loaded files (
) are dis-
played in the bar below the fields in the section “Prerecorded Audio”.
Remove Loaded Audio Files from Memory:
In case of a loaded audio file, the button
Restore Default
(
) is indicated in the respective line.
Click on this button to remove the previously loaded audio file from the memory; the respective state
will then be reset to the default settings.
Note:
Default setting for “Incoming Call” and “Outgoing Call (Button <x>)” means, that the factory default
tones become active again.
Default setting for “Error” and “Location Message” means, that no signal tones are put out for these
states.
2
3
2
3
1
1
