Configuration via Web Interface
Commend SIP Series
34
2.0/0612
Configuration via Web Interface
The configuration of the SIP station has to be carried out via the integrated web interface.
1st Connection
Establish Connection
The SIP stations are delivered ex works with a standard IP address, via which the web interface of the
station can be accessed:
IP address
192.168.1.200
Subnet mask
255.255.255.0
If the station can not be used in the local network (LAN) with this IP address, then the following pro-
cedure is recommended:
Establish connection between PC and SIP station via a hub (or switch) or via a direct connection
cable.
The PC must be in the same subnet as the SIP station.
This means, an appropriate IP address of that subnet range (e.g. 192.168.1.199) has to be allocated
to the PC temporarily.
Login
Enter the IP address of the SIP station in the address bar of the respective web browser
It is recommended to use the following web browsers:
Mozilla Firefox min. Version 3.5
Internet Explorer min. Version 8
After entering the IP address, a login dialogue appears where following data has to be entered:
User name
factory default:
admin
Password
factory default:
commend
Attention:
When connecting the SIP station with this IP-address to the local network (LAN), it is essential to make
sure that this IP-address does not already exist in the network!
Note:
If more stations are configured consecutively, the ARP cache has to be deleted at the PC/notebook.
Note:
It is recommended to change the user name and password
see ”System Settings” on page 53
.
Reception
Office
Garage
192.168.1.200 / 24
PC / Notebook:
:
192.168.1.199 / 24
Hub / Switch
e.g.
SIP station:
