Mounting
Commend SIP Series
18
2.0/0612
Mounting Surface Mount Kit WSSH 50P
T
R
R
4a
3
2
1
2
5
4
2
1
3
4a
4
5
3
..... Front panel (plastic) with station electronics
..... Surface mount box (plastic)
..... Top gasket for surface mount box
(mounted ex works)
MOUNTING
DIRECTION
To corresponding
expansion opening
of
surface mount box
of e.g. WS expansion module
Illustration
front panel
*
gasket
gasket
Snap in
Insert cable
Pull back tight
Dismounting: Pull off the front panel.
Mounting: Press the front panel onto the surface mount box
..... IP 65 cable feed through
..... Connection spacer (with gaskets) for connecting two surface mount
boxes and for cable feed through
The expansion openings have to be broken out with a blunt object at the outer notch!
If possible, 2 connection spacers shall be used per expansion.
Make sure the connection spacer is snaped-in correctly in the expansion opening!
The expansion openings have to be broken out with a blunt object at the outer notch!
If the rear opening is used, attach the gasket at the backside of the flush mount box (see Measurements).
..... Gasket for expansion opening at the rear of the housing
The cable feed through can be put in after breaking out the expansion openings
(installation cable feed through see above).
Mounting via wall mounting kit (screws, dowels, gasket rings and washers) – in extent of supply.
Washer and gasket ring have to be mounted inside the surface mount box.
