Introduction
Commend SIP Series
6
2.0/0612
Technical Data
Network, Codecs
Power Supply
Hardware
Note:
In the following tables the technical data of all
„SIP Series Versions”
are listed.
DTMF Decoding:
RFC 2833
SIP User Agent (UDP):
RFC 3261
IP Protocol:
IPv6 ready
IPv4, TCP, UDP, HTTP, RTP, RTCP, DHCP, SNMPv2c, STUN
Ports:
Web interface for configuration (http): TCP Port 80
SIP: UDP Port 5060
RTP: UDP Port 7078 (incoming)
Optional DNS: UPD and TCP Port 53
Optional SNMP: UDP Ports 160 and 161
Ethernet:
2 x 10/100 MBit/s (Full/Half Duplex)
Codecs:
G.711 a-Law
G.711 µ-Law
prepared for G.722
Frequency range
300 – 3,400 Hz
Power consumption:
1,6 W idle
approx. 2 W at conversation (depending on volume)
PoE (Power over Ethernet):
Standard IEEE 802.3af
Power consumption of the terminal device:
Class 0 (0.44 W to 12.95 W)
SIP Series P, SIP Series V, SIP Series VE only:
Power supply:
24
VDC ± 2 V
, 500 mA or PoE
Attention:
It is mandatory to ensure a correct power supply of the SIP station:
min. 22 VDC, max. 26 VDC
SIP Series M only:
Power supply:
12 – 24 VAC or 15 – 35 VDC, 500 mA or PoE
RAM Memory:
32 MByte
Flash Memory:
8 MByte
Handset, Headset:
EM sensitivity: 14 mV
eff
EM impedance: 3.3 k
Ω
/ EM supply: 2.5 V
EP level: 850 mV
eff
at 0 dBm0 / EP impedance: 200
Ω
Amplifier:
Built-in amplifier class “D” with 2.5 W
Outputs:
2 SPDT relay outputs
30 V / 1 A: 100,000 make-and-break cycles
Inputs:
3 inputs for floaing contacts
Relative Humidity:
up to 95% not condensing
Connection:
pluggable screw terminals
IP Uplink/Downlink:
shielded RJ 45 modular jacks
Cabling:
min. Cat. 5
