Commend SIP Series
Configuration via Web Interface
2.0/0612
47
Pre-recorded audio can be used for the following states:
Outgoing Call Destination
<x>
– Outgoing call from the SIP station, initiated via the respective
button (e.g. 0, T or X).
The audio file can be configured e.g. as calm down message at call initiation or as individual call
tone for the call initiator.
Incoming Call
– Incoming call to SIP station.
The audio file can be configured as individual calling signal (and/or ring tone).
Error
– Error in establishing a call (e.g. call destination can not be reached or registration not carried
out etc.).
Pre-recorded audio can be used e.g. as acoustic signal for line fault
Location Message
– The called SIP device (e.g. mobile phone) receives a location message as infor-
mation where (i.e. from which SIP device) the call comes from.
Loading Pre-recorded Audio:
In the desired line click on the 1st button to the right of the blank field (“
Browse...
”)
In the appearing dialogue select the desired audio file
Via the button
Upload
the selected audio file is loaded into the station.
Note:
The labelling and the number of the “call destination” fields depends on the used station version
(1-,2-,3-button version
see page 10
).
Note:
In order that the calling signal (ring tone) is put out at the station, “
Autoanswer
” may
not
be confi-
gured for call acceptance
see page 40
.
Note:
The labelling of the button depends on the used browser and operating system.
Note:
Uploading, recoding and saving the audio file can take some seconds:
Loading time = 2 x file length;
E.g. file with 10 seconds: loading time = 2 x 10 = 20 seconds
All audio files together may not exceed the max. length of 60 seconds
see page 46
.
