Commend G3-IAX Series, Руководство по эксплуатации продукта

Страница: 32 / 42

PABX mode G8-IAX / G3-IAX
32 3.0/0616
Call request in PABX mode

Configure the “Dialling Sequences” and “call numbers” as described at “Configuration CCT 800 –
auto-dialler mode” on page 23 .

Configure the respective channel of the Gx-IAX card as “central control desk”.

For the calling station, configure a “call request” to the respective “central control channel”.

For a calling input, configure an “input message” to the respective “central control channel”.
NOTE: Further information
For further information about the configuration of the features listed below, see manual
“
PRO 800 Basic ”.
ATTENTION: Important notes to input messages
 An input message is set up to the VoIP phone similar to a call request or a “phone call”.
 Also the “Caller ID” (call number and “display text EE 811”) of the input message is indicated at
the VoIP phone.
 If the indication of input messages via buzzer is deactivated, no call is issued to the VoIP phone
(
Inputs > Input message > tab Call types ).
 In order that the input message can be acknowledged on the VoIP phone by pressing the button
“#”, an appropriate acknowledgement type has to be configured (at
Inputs > Input message >
tabs Operations for ... ).