4K HDBaseT 4x4 Matrix Switcher
[x] is the input port, when the value of X
is 9, it means to upgrade all input ports.
When
the
switcher
receives
the
command, it will show a message to
prompt you to send EDID file (.bin file).
Operations will be canceled after 10
seconds. Please cut off all connections
of HDBaseT ports.
EDID/[x]/[y].
Set the EDID data of input port [x] to
built-in EDID No.[y].
[y]=1~5, correspond to the 5 embedded
EDID data separately
EDID/[x]/[y]
UpgradeIntED
ID[x].
Upgrade one of the 5 embedded EDID
data, x is the serial number for EDID data:
1. 1080P 2D 2CH
2. 1080P 3D 2CH
3. 1080P 2D Multichannel
4. 1080P 3D Multichannel
5. 3840x2160 2D (30Hz)
When the switcher gets the command, it
will show a message to send EDID file
(.bin file). Operations will be invalid after
10 seconds.
Please
send
the
EDID file
GetIntEDID[x]
.
Return the embedded EDID data ranked
x, [x]=1~5
GetInPortEDI
D[X].
Return the EDID data of input [x],
[x]=1~4
%0801.
Auto
HDCP
management,
activate
carrier native mode
%0801
%0900.
Switch to carrier native mode.
Carrier native
%0901.
Switch to force carrier mode.
Force carrier
%0911.
Reset to factory default.
Factory Default
%9951.
Check the command sent by port 1 when
PWON.
Port
1:data
when
PWON
%9952.
Check the command sent by port 2 when
PWON.
Port
2:data
when
PWON
%9953.
Check the command sent by port 3 when
PWON.
Port
3:data
when
PWON
%9954.
Check the command sent by port 4 when
PWON.
Port
4:data
when
PWON
%9955.
Check the command sent by port 1 when
PWOFF.
Port
1:data
when
PWOFF
Comm-tec Srl
27
www.comm-tec.it
