4K HDBaseT 4x4 Matrix Switcher
Control 3rd party device from local
●
Control 3rd party device from remote
Connect the RS232 (3-pin pluggable terminal block) port in any zone to controlled
device (3rd party device), and connect PC to the corresponding (same zone as
controlled device) receiver, see below:
Control 3rd party device from remote
4.3.4
Installation/uninstallation of RS232 Control Software
●
Installation
Copy the control software file to the computer connected with the
switcher.
●
Uninstallation
Delete all the control software files in corresponding file path.
4.3.5
Basic Settings
Firstly, connect the switcher with an input device and an output device. Then,
connect it with a computer which is installed with RS232 control software.
Double-click the software icon to run this software.
Here we take the software
CommWatch.exe
as example. The icon is showed as
below:
Comm-tec Srl
22
www.comm-tec.it
