4K HDBaseT 4x4 Matrix Switcher
Control far-end device through IR ALL IN port
Note: Send command “%0901.” to enter infrared carrier enforcing mode if the IR
Receiver connected to IR ALL IN is not with carrier.
4.2.4
Control Local Device Remotely
Connect IR receiver(s) to IR IN on far-end HDBT receiver(s), and IR Emitter(s) to IR
OUT port of the switcher, and use the IR Remote of local souce to control the
device remotely.
● 1 to 1:
Connect an IR receiver to IR IN on far-end HDBT receiver, and an IR Emitter to
IR OUT port of the switcher. Use the IR Remote of local souce to control the
device remotely. See below:
Control local device from remote
Note: Send command “%0901.” to enter infrared carrier enforcing mode if the IR
Receiver connected to IR IN of the receiver is not with carrier.
● Multiple to Multiple: (IR Matrix)
The 4 “IR OUT” ports and the 4 “IR IN” ports on the far-end receivers make up
an 4x4IR matrix. See as below:
Comm-tec Srl
19
www.comm-tec.it
