Comet MS6D, Инструкция по эксплуатации, Страница: 35 / 56

ie-ms2-MS6-10 35
Date and time
Channel 1: T[°C]
1.1.2009 08:00:00 23,8 continuous
1.1.2009 08:30:00 24,5 continuous
1.1.2009 09:00:00 26,8 continuous
1.1.2009 09:30:00 33,2 continuous
1.1.2009 10:00:00 37,5 continuous
1.1.2009 10:30:00 39,3 continuous
1.1.2009 10:55:00 40,1 conditional
1.1.2009 11:00:00 41,3 contconditional
1.1.2009 11:05:00 40,2 conditional
1.1.2009 11:30:00 40,3 contconditional
1.1.2009 11:35:00 42,5 conditional
1.1.2009 11:40:00 40,1 conditional
1.1.2009 12:00:00 34,1 continuous
1.1.2009 12:30:00 30,1 continuous
1.1.2009 13:00:00 25,2 continuous
1.1.2009 13:30:00 20,1 continuous
Conditional record can be linked to a simple Condition or on logical Combination of conditions
(maximum four conditions from different channels linked by operators AND and OR).
Example of conditional record in case of logical combination of conditions:
C) Sampled record - if there is a need to know time and measured value when certain event appeared
defined by Condition or Combination of conditions, use this selection. Work with conditions is
similar as in previous case. Always time and value is stored when defined state of conditions started
or was terminated.
Example table with sampled record:
Date and time
Channel 1: T[°C]
1.1.2009 08:01:11 23,8
1.1.2009 08:40:23 24,5
1.1.2009 09:05:07 26,8
1.1.2009 09:12:44 33,2
1.1.2009 10:08:09 37,5
1.1.2009 10:32:48 42,3
condition 3 at channel 2
condition 2 at channel 5
condition 4 at channel 1
condition 1 at channel 2
record will run, if equation is valid:
(condition 3 at channel 2 AND condition 2 at channel 5)
OR
(condition 4 at channel 1 AND condition 1 at channel 2)
Conditioned
record
at channel 10
runs