Comet MS6D, Инструкция по эксплуатации, Страница: 34 / 56

34 ie-ms2-MS6-10

if there is a need record measured value, select one from three available record mode.
These modes can be combined. Binary inputs enable only the third mode
–
record of state
changes on input.
A)
Continuous record
- if there is a need to record measured value to the instrument memory
without respecting any other conditions, use this selection and select suitable logging interval.
Logging function can be limited in time both globally (i.e. Date and time from ...to) and daily (daily
from...to).
If no from offered logging intervals suit you, use record in alternative daily times, defined before
on bookmark Profile.
Example of table with continuous record:
Date and time
Channel 1: T[°C]
1.1.2009 08:00:00 23,8
1.1.2009 08:30:00 24,5
1.1.2009 09:00:00 26,8
1.1.2009 09:30:00 33,2
1.1.2009 10:00:00 37,5
1.1.2009 10:30:00 42,3
1.1.2009 11:00:00 45,1
1.1.2009 11:30:00 45,2
1.1.2009 12:00:00 44,1
1.1.2009 12:30:00 40,1
1.1.2009 13:00:00 35,2
1.1.2009 13:30:00 30,1
B)
Conditional record
–
if there is
need to record measured value to the instrument memory only in
case, if defined conditions are valid, then use this selection. Select suitable logging interval and
assign conditions for the record. Logging function can be limited in time both globally (i.e. Date
and time from ...to) and daily (daily from...to).
If no from offered logging intervals suit you, use record in alternative daily times, defined before
on bookmark Profile.
Example of measured values list (condition for record
–
temperature i
s higher than 40°C):
Date and time
Channel 10: T[°C]
1.1.2009 10:55:00 40,1
1.1.2009 11:00:00 41,3
1.1.2009 11:05:00 40,2
1.1.2009 11:30:00 40,3
1.1.2009 11:35:00 42,5
1.1.2009 11:40:00 40,1
By means of continuous and conditional record situation can be solved, when device operation is
monitored. In case of its trouble-free operation record with long logging interval is sufficient, but in
case of failure there is a need to have detailed record with failure.
Example of list of measured values (continuous record with interval 30 minutes and conditional
record with interval 5 minutes at temperature higher than 40
°C)
: