7
www.combisteel.com
Control panel
A. pressure gauge
Showing the vacuum pressure of chamber
B
．
Indicate light
(1) light being on indicates that the relative working mode is ready to be set.
(2) light being flashing indicates that the machine is working under the relative working mode.
C. LED Display
(1) OFF
—
standby status; ON/CLO
—
ready status
(2) When the working mode is ready to set, the digital display will show the time of setting.
(3) When the machine is working, the digital display will show the rest time of setting.
D. Setting button
Press Setting Button to switch the working modes, press “
∨
” and “
∧
” to set the time of each mode.
E. Time setting button
Press “
∨
” and “
∧
” button to set the time of each mode.
F. Stop button
Press Stop button to stop the machine working.
Technical Parameter
Voltage:
220-240Vac 50Hz
Power:
1080W
Pump:
Oil pump
Pressure:
-29.9”Hg
（
-1012mbar
）
-directly in pump
-29.8”Hg
（
-1009mbar
）
-in vacuum chamber
Seal wire width: 3.5 mm x 2+3.5mm x 2
Seal bar:
410mm x 2
Max bag width:
410mm
Size:
512x537x1016mm
CAUTION: DO NOT IMMERSE IN WATER.
To provide continued protection against risk of electric shock, connect to properly grounded outlets only.
ATTENTION: NE PAS IMMERGER.
Pour assurer une protection continue contre les risques de choc électrique, branchez à une prise correctement mise à la terre.
