4
www.combisteel.com
Be Cautious! Damage Machine.
Tipping over the machine whose pump is full of oil will make the oil enter into the chamber of
pump. When start the pump, if there is too much oil in its chamber, it will damage the pump.
When the pump is filled with oil, please do not transit it any more.
Store the machine in short time
•
Turn off the machine, unplug it the power plug, and put away the power cord.
•
Close the lid and lock it via lid lock.
•
If possible, please cover it with plastic bag to avoid anti dust.
•
Please keep the machine in a dry, dust-free and shockproof environment.
Store the machine in long time
Machine inside is already processed through anticorrosive treatment in factory, it is not necessary to use protective oil again.
However, if the storage condition is severe (for example, under the caustic atmosphere; temperature is very high or frequently
changing), then it is necessary to use oil again to keep the machine in good condition.
•
Turn off the machine, unplug the power plug, and put away the power cord.
•
Close the lid and lock it via lid lock.
•
Please cover it with plastic bag to avoid anti dust.
•
If possible, please keep the original package.
•
If moving or transiting is needed, please make sure all the oil in pump is eliminated.
•
Please keep the machine in a dry, dust-free and shockproof environment.
Installation
Be Cautious! Damage Machine.
If below necessary conditions could not be met during the installation, it will cause the machine
damage. Be careful to get hurt.
Please must follow with below necessary conditions to install the machine.
Please make sure the installing environment conform the safety regulations.
•
No flammable or explosive gas surrounding.
•
Suitable temperature range: 5-40°C. If installation is need proceeding in environment out of this range, please contact
the supplier.
•
Ambient pressure: standard atmospheric pressure.
•
Make sure the power supply conform the standard.
•
Keep the machine at an upright position when move or transit it as tip it over will damage the pump.
•
Keep the machine in a horizontal place when use it.
•
Maintain a distance of 10cm between the unit and walls or other objects for ventilation.
•
Keep the machine away from the heat source or steaming device (such as steaming pot, dish washing machine or stove)
•
Make sure there is enough spare to change the oil and change the easy-damaged parts.
Filling oil and draining oil
Be Cautious! Damage the Machine.
No oil is in a new machine.
Pump will be damaged if it is running without oil.
Before start the machine, please ensure the pump is full of oil.
Filling the oil from other positions of pump may damage the pump.
Ensure through the oil port to fill the oil into the pump.
It will be harmful to human health with long-term effects of inhaling the gas (that might be
containing residual oil) which is expelling from pump during the operation.
Please make sure that using the machine is in a good condition of ventilation.
When the pump is working, the pump chamber inside will be full of oil mist
where is in high temperature and high pressure. If the oil-filling port is open, it
might be hurt by the hot oil mist. Only when the pump stops working, the oil plug
could be open. When the pump is working, the oil plug must be screwed tight.
