17
www.combisteel.com
10.2 Hazardous areas and residuals risks
This manual indicates all the procedures during which residual risks for the operator are present. The residual
risks can be eliminated by carefully following the procedures indicated in this manual and by using the
recommended personal safety equipment.
RESIDUAL RISKS
OPERATING STAGE
RISKS
PPE to use:
INSTALLATION
Area around the machine when
moving it
Area in which the machine is
handled, packed or unpacked
Risk of striking and crushing the
operator
OPERATING STAGE
RISKS
PPE to use:
USE
Use of the machine
•
Risk of striking and crushing
the operator.
•
Risk of entanglement in the
machine spiral (*)
OPERATING STAGE
RISKS
PPE to use:
ROUTINE MAINTENANCE
Areas in which routine machine
maintenance is carried out
Risk of blows and abrasions.
SCHEDULED MAINTENANCE
Risk of blows and abrasions.
Areas in which scheduled machine
maintenance is carried out
(*) CAUTION
: If the machine is stopped to carry out maintenance, there is a residual risk that when the protective
grille is opened the spiral will continue to turn by inertia. This risk is not present if the machine is working with a
full load. This is because when the grille is opened in this mode, the inertia of the spiral will be annulled by the
processed product (dough). Moreover, if the machine is carrying out a complete idle cycle, the spiral will take a
few seconds to stop completely because of the force of inertia. In this case the operator must take care when
entering the risk zone.
Obligation to use protective gloves.
Obligation to use protective footwear.
Obligation to use work aprons.
