16
www.combisteel.com
9. Fault Finding
BREAKDOWN
REASON
SOLUTION
Machine doesn’t work.
Energy does not come to machine.
Check the supply voltage.
Supply fuse blown.
Check the fuse.
Engine heat blown.
Wait thermal cool, and switch on
Circuit breaker is open.
Close circuit breaker.
Engine working noise is
coming, but it is not suitable
One of the feeding phase is missing.
Check phase one by one.
Drive belts are missing or loose
Check the belt tension.
There is a congestion in the
mechanical movement
Turn off energy!
and check
manually spiral mixing tool.
Inform technical service if there is
congestion.
Machine receives energy bu
t
the machine is not activated.
Engine heat is blown
Wait for thermal cooling and
switch on.
Safety Switches are not active.
Make sure that the bowl is above
and protective closed.
Switch mechanical adjustment
damaged or broken.
Contact with technical service.
Defective part in the control circuit
(contactor-thermal-Button-etc.)
Contact with technical service.
10. Safety
10.1 Safety Criteria
During the design and construction of this machine the manufacturer has adopted the criteria and devices
needed to satisfy the essential safety requirements imposed by the Machinery Safety Directive 2006/42/EEC and
subsequent amendments, by the Low Voltage Directive 2006/95/EEC and subsequent amendments and by the
Electromagnetic Compatibility Directive 2004/108/EEC and subsequent amendments.
The manufacturer strongly recommends careful observation of the instructions, procedures and
recommendations contained herein as well as strict observation of the current safety regulations regarding the
work environment. This also applies to the use of both the correct personal safety equipment and machine
protection devices.
Danger
: Do not wear loose clothing, ties, chains, or watches that could get caught in the moving parts of the
machine.
Note
: The manufacturer will not be liable for any damage or injury to persons, animals or things caused by non-
observance of the safety rules and/or recommendations given in the documentation supplied.
