COMAC ULTRA 120 B-G, Руководство по эксплуатации и обслуживанию

Страница: 21 / 72

21
Treading ban label:
Located on the machine, to identify the surfaces that must not be trodden on (risk of personal injury or damage
to the machine).
Label about detergent solution filter cleaning:
Located on the front left-hand side of the machine, to identify the position of the detergent solution filter and
remind the operator to clean it after every machine use.
Symbol of maximum temperature for filling the solution tank:
Located on the upper part of the solution tank, to indicate the maximum temperature of the water for filling the
solution tank safely.
Symbol of the vacuum motor thermal circuit breaker:
Located on the bottom part of the control panel, to identify the position of the thermal circuit breaker of the
vacuum motor.
Label about vacuum cap filter cleaning:
Located on the rear part of the machine, to identify the position of the vacuum cap filters and remind the operator
to clean them after every machine use.
Label for quick filling kit position:
Located on the solution tank, to identify the position of the connection point for the quick tank filling kit.
Label for the endothermic engine air command lever (G versions):
Located on the machine, to identify the command lever for endothermic engine air.
Label for the endothermic engine rpm command lever (G versions):
Located on the machine, to identify the command lever for endothermic engine rpm.
Label indicating that it is forbidden to approach with naked flames (G versions):
Located near the gasoline tank, to indicate that it is forbidden to go near the machine with naked flames.
Fuel level label (G versions):
Located on the gasoline tank, to indicate the fuel level inside.