Coltene BioSonic UC150, Руководство пользователя

Страница: 9 / 390

9
EN
6. Filling Instructions
• Ensure that the drain handle
(Figure 5*)
is fully rotated counter-clockwise to the closed position.
Fill the unit with warm water to the fill line indicator (Figure 6*) . Ensure that the water level is
filled up to the minimum line and does not exceed the maximum line while using accessories
like beakers or baskets.
• Pour the required amount of ultrasonic cleaning solution (eg. BioSonic General Purpose UC30,
BioSonic Enzymatic Ultrasonic Cleaner UC32) and water into the tank. Note that some solutions
require the use of a beaker.
• Change the solution in the tank daily or sooner if it appears soiled or discolored. When beakers
are used, change the solution in the beaker after each use.
• Drain unit by fully rotating the drain handle clockwise to the “Open” position and allow the
solution to empty into sink or waste system. Rinse tank and fully rotate the drain handle
counter-clockwise to the “Closed” position. Never drain tank by manually discarding solution as
this may cause the unit to stop working properly.
NOTE: Never operate the unit without solution. Operating a dry tank will void the warranty.
Do not place objects directly on bottom of tank. Always use a cassette basket or beakers.
7. Degassing
Degassing the solution eliminates large air bubbles that interfere with the cleaning process and is
necessary each time new solution is added to the tank.
NOTE: Be careful not to introduce unwanted gases into the liquid. Do not pump/pour the
solution too quickly into the bath, insert/remove the product being cleaned into the bath too
rapidly, or move product while in the bath. Doing so will re-introduce gas into the solution and
require a longer degas cycle.
• PRESS THE DEGAS icon on
00 vector graphics: logo and buttons
CB
M 1:1
20.10.2016
04-A-button-program-light
05-A-button-program-regular
06-A-button-program-heavy
07-A-button-program-my
04-B-button-program-light-feedback
05-B-button-program-regular-feedback
06-B-button-program-heavy-feedback
07-B-button-program-my-feedback
11-A-button-settings
08-A-button-log
09-1-A-button-heater-first
10-A-button-solution-degas
11-B-button-settings-feedback
08-B-button-log-feedback
09-2-A-button-heater-after-code
09-B-button-heater-feedback
10-B-button-solution-degas-feedback
12-A-button-language-measurest
13-A-button-date-time
14-A-button-my-setup
15-A-button-information
12-B-button-language-measures-feedback
13-B-button-date-time-feedback
14-B-button-my-setup-feedback
15-B-button-information-feedback
16-A-button-degas
16-B-button-degas-feedback
01-logo-loading
03-product-name
02-logo-information
the main screen.
• Select the type of solution to log solution used or degas only and press
00 vector graphics: single-icons and screen buttons
CB
M 1:1
20.10.2016
30-settings
31-temperature-large
32-temperature-medium
33-temperature-small
34-program-light
35-program-regular
36-program-heavy
37-program-my
38-timer-medium
39-timer-large
40-solution
41-degas
hot surface
42-log
43-information
44-close-lid
45-lid-is-open
46-lid-was-open
47-repair
48-software-update
60-attention
warning/caution
61-instructions
51-statusbar-standby-closed
52-statusbar-standby-opened
20-A-button-checked
20-B-button-checked-feedback
50-A-button-standby
50-B-button-standby-feedback
21-A-button-save
21-B-button-save-feedback
22-A-button-home
22-B-button-home-feedback
25-A-button-play
25-B-button-play-feedback
26-A-button-pause
26-B-button-pause-feedback
23-A-button-back
23-B-button-back-feedback
24-A-button-download
24-B-button-download-feedback
62-A-button-ok
62-B-button-ok-feedback
to degas.
• The BioSonic UC150 will begin to cycle on and off during the degassing process. The timer will
count down from five minutes.
• DEGAS COMPLETE! Once the timer reaches zero, the words “Degas Complete” will be displayed.
Your solution is now ready for use. Press
00 vector graphics: single-icons and screen buttons
CB
M 1:1
20.10.2016
30-settings
31-temperature-large
32-temperature-medium
33-temperature-small
34-program-light
35-program-regular
36-program-heavy
37-program-my
38-timer-medium
39-timer-large
40-solution
41-degas
hot surface
42-log
43-information
44-close-lid
45-lid-is-open
46-lid-was-open
47-repair
48-software-update
60-attention
warning/caution
61-instructions
51-statusbar-standby-closed
52-statusbar-standby-opened
20-A-button-checked
20-B-button-checked-feedback
50-A-button-standby
50-B-button-standby-feedback
21-A-button-save
21-B-button-save-feedback
22-A-button-home
22-B-button-home-feedback
25-A-button-play
25-B-button-play-feedback
26-A-button-pause
26-B-button-pause-feedback
23-A-button-back
23-B-button-back-feedback
24-A-button-download
24-B-button-download-feedback
62-A-button-ok
62-B-button-ok-feedback
to return to the main screen.
*see last page for figures