Page
37
of
40
FABJET GRAND
11. Troubleshooting
Printer Not Initializing
•
Emergency button is pressed
•
Capping knob is in up position
•
Head Power is not ON
•
Encoder sensor is not connected to HB
•
Any connector or jumper is removed from MB
•
Limit switch is disconnected
Printer Manager Not S
howing “Ready”
•
USB is disconnected from computer or Mainboard or loosely connected
•
USB cable is faulty
Print Not Drying/Ink Marks on Back of the Fabric
•
Print dryer is not ON or not working
•
Dryer temperature is not sufficient
•
Coating of fabric is not correct
•
Fabric supporting bar and Take Up roller is stained with ink
Ink Not Filling
•
Main tank is empty
•
Ink pipe is having cut/bend
•
Ink pump is not working/connector loose/open
•
Sub tank float connector is loosely connected to the headboard
•
Sub tank float is not working
Print Stops in Between Printing
•
USB cable is loose / faulty
•
Image files are heavy in size
•
Ground wire is disconnected
•
Encoder scale is having ink stains/scratches
•
Pulley or belt is slipping
•
Ripped file is having error
Print is Shifting wrt Fabric/ Junk Printing
•
Encoder scale is having ink stains (print shows vertical color bands)
•
Encoder sensor is not clean
•
Pulley or belt is loose or teeth wear out and slipping
•
LVDS cable is faulty
Print is Blur
•
No proper calibration viz. bi-direction and step
•
Head height is disturbed and not calibrated for above
•
Incorrect resolution is selected
•
X div is selected "High Speed" instead of "High Precision"
