Page
32
of
40
FABJET GRAND
8. Switch OFF Procedure
Follow these steps to switch OFF the machine:
Step 1:
Perform the Nozzle Test to check the status of head nozzles. If test result is not OK, then clean
the head by referring the Head Cleaning section of this manual.
Step 2:
Release the Pinch Roller button, as shown below:
Fig 53: Releasing the Pinch Roller Button
Step 3:
Remove the fabric from the machine.
Step 4:
Switch OFF the
Supply and Take UP Auto/Manual
buttons.
Step 5:
Turn OFF the ink valves by moving the knob in the clockwise direction, as shown below:
Fig 54: Turning OFF the Ink Valves
Step 6:
Ensure the capping process (Refer to the
Capping Procedure
section) has been done properly
to protect the print head.
Note:
Capping tray must contain water.
Step 7:
Turn OFF the main power.
Step 8:
Close all the covers of the printer.
