Page
34
of
40
FABJET GRAND
9.
Do’s and Don’t
Do
’
s
•
Keep the room dust free and maintain the temperature between 18°C and 28°C
•
Perform Nozzle test daily before using the machine
•
Use only the recommended ink in the machine
•
Check and refill the ink main tank regularly to avoid air lock
•
Head wiper to be kept clean
•
Wiper tray should be filled with fresh water and recycle the water regularly
•
Keep the capping station cleaned, and should be filled with ink/water while capping
•
Whenever head plate height is changed, adjust the wiper bracket height accordingly
•
Always care about the wrinkles on fabric, it may damage the Print Heads
•
To avoid air in head pipes, always maintain the ink level more than 1 Litre in the main tank
and wipe the Print Heads immediately after purging
•
Feed Adjust value has to be adjusted in decimal format up-to two decimal places
•
Maintain the ink negative air pressure between
–
3.8 to -4.0
•
Always monitor the Air Pressure (7-8bar) for trouble free printing
Don’ts
•
Avoid ink spilling on the Print Head and head cables
•
Don’t use expiry ink and store the ink at favorable environment
•
Avoid printing without Colorbar
•
Don’t
move the carriage over the Capping Station when printer is OFF and capping is in UP
position
•
Don’t allow
the Capping and wiping tray station to dry
•
Don’t print without Media Clamp
•
Don’t handle Print Head without anti
-static protection
•
Don’t leave the Print Head without capping
•
Avoid head damage due to fabric and Print Head confliction
