Cognex In-Sight 1000, Инструкция по установке

Страница: 4 / 46

Installing In-Sight™ 1000 Series Vision Sensors
iv
Precautions
Observe these precautions when installing the In-Sight 1000 to reduce the risk of injury
or equipment damage:
n Never connect the In-Sight 1000 to a power source other than 24VDC. Any
other voltage creates a risk of fire or shock and can damage the In-Sight
hardware.
n
Do not install the In-Sight 1000 in locations that directly expose it to
environmental hazards such as excessive heat, dust, moisture, humidity,
impact, vibration, corrosive substances, flammable substances, or static
electricity.
n
To reduce the risk of damage or malfunction due to over-voltage, line noise,
electrostatic discharge (ESD), power surges, or other irregularities in the power
supply, route all cables and wires away from high-voltage power sources.
n
Do not open the In-Sight 1000. This device does not contain user-serviceable
parts. Do not make electrical or mechanical modifications to the In-Sight
hardware. Unauthorized modifications violate your warranty.