Cognex In-Sight 1000, Инструкция по установке

Страница: 22 / 46

Section 2: Installing the In-Sight 1000 Installing In-Sight™ 1000 Series Vision Sensors
14
7 Verify the In-Sight PC Host software installation by opening the Start menu,
opening the Programs menu, opening the In-Sight program group, and then
selecting In-Sight PC Host. The In-Sight PC Host window will appear, displaying
the In-Sight spreadsheet.
8 Verify the In-Sight Guide & Reference installation by opening the Start menu,
opening the Programs menu, opening the In-Sight program group, and then
selecting In-Sight Help. If you are running Windows NT 4.0 and the
In-Sight Guide
and Reference does not open, verify you are using Internet Explorer version 4.0 or
higher. If not, use Service Pack 4 to update your browser.
NOTE Open the RELNOTES.DOC file for current information about In-Sight software, including new
features, fixes, and known issues. Registered In-Sight PC Host users can download updated
versions of In-Sight documentation at www.cognex.com/In-Sight/support/support.asp.
2.3 Adding the In-Sight 1000 to a Network
The In-Sight 1000 is ready to be installed as a network host once it has power and is
physically connected to the network.
As previously described, there are many possible In-Sight network configurations. The
specific procedure for adding an In-Sight 1000 to a network depends on whether or not
a
Dynamic Host Configuration Protocol (DHCP) server is available. The DHCP
server automatically assigns the In-Sight 1000 sensor a network IP address and
Subnet Mask.
NOTE When installing the In-Sight 1000 to an existing network, consult your network administrator to
determine whether a DHCP server is available.