Cognex In-Sight 1000, Инструкция по установке

Страница: 31 / 46

Installing In-Sight™ 1000 Series Vision Sensors Section 2: Installing the In-Sight 1000
23
2.5.4 Default Gateway
The Default Gateway specifies the IP address of the gateway host, if available on the
network.
NOTE The Default Gateway setting will be grayed out when the Use DHCP Server checkbox is
enabled. The value shown is the gateway assigned by the DHCP server.
The gateway host is responsible for sending and receiving data between hosts on
different networks, routing data packets from a device on the local subnet to a device
on another subnet.
For example, if a 1000 sensor will need to communicate with a remote host on a
different subnet, enter the address of the gateway device in the Default Gateway field.
However, if the sensor will need to communicate only with devices on the local subnet,
do not enter an address for the Default Gateway (leave the field all zeros).
2.5.5 DNS Server
The DNS Server specifies the IP address of the host on the network providing DNS
resolution, if available.
NOTE The DNS Server setting will be grayed out when the Use DHCP Server checkbox is enabled.
The value shown is the DNS Server assigned by the DHCP server.
A Domain name (i.e., yourcorp.com) is an alias for an IP address (i.e., 192.168.0.0). A
DNS (Domain Name Server) maintains the data on corresponding domain names and
IP addresses. The DNS Server setting determines which host is contacted (by IP
address) in response to a given Domain Name.